The MotoSport.com Custom Dynamics TruBEAM Halo 7in Headlight With Adapter And Hi/Lo Ring Kit includes ONE Custom Dynamics TruBEAM Halo 7 Inch LED Headlight, ONE H4 Headlight Adapter and ONE Custom Dynamics High & Low Beam Halo LED Headlight Adapter for a complete install, each with the following features:
Custom Dynamics TruBEAM Halo 7 Inch LED Headlight:
The complex reflector design features three low beam LEDs and two high beam LEDs with a combination of projector and reflector type LEDs and built-in Halo ring. Durable polycarbonate lens with plug-and-play H4 connector. No additional trim ring needed. DOT and SAE Compliant. Available in your choice of Chrome or Black Chrome (Smoked) reflector. Lifetime warranty against LED failure.
- 5800K color temp.
- 1.1A low current draw, 1.5A high current draw , 0.2A Halo ring current draw.
- Three low beam LEDs, two high beam LEDs.
- Operating temp. range -40C - 85C.
- 7" diameter.
- Input voltage: 9V - 32V.
- IP68 rating.
- Projector and reflector type LEDs.
- Plug-and-play H4 connector.
- Built-in DRL Halo.
- Chrome or black chrome reflector.
- DOT and SAE Compliant.
- Lifetime LED warranty.
- Sold individually.
- Notes: Custom Dynamics plug-and-play High & Low Beam Halo LED Headlight Adapter (in combo) is required to enable internal DRL Halo rings. In addition, this adapter will keep the center headlight low beam on when the high beam is activated to provide maximum light output.
Custom Dynamics H4 Headlight Adapter:
Required when replacing the stock headlamp(s) with a LED headlamp or any other H4 based headlamp.
- Plug-and-play installation.
- One adapter needed per bike.
Custom Dynamics High & Low Beam Halo LED Headlight Adapter:
High-Lo-Halo adapter is required to enable the built in Halo ring of the Custom Dynamics TruBEAM LED Headlamp when connection is not already present. In addition, this adapter will keep the center headlamp low beam on when the high beam is activated to provide maximum light output.
- Keeps high and low beams on at same time.
- Enables built-in LED Halo ring.
- Plug -and-play H4 or Posi-Lock connector.
- 8.5" / 9.5" wire lead.
