A marvel of electronic wizardry, this module makes single filament or single circuit turn signals on the rear of the bike function as running lights, turn signals, and brake lights!
- It can be used with Kuryakyn's L.E.D. Silver Bullets, the incandescent Fender Strut Lights, stock turn signals, or any single filament light you may already have installed on the rear of your bike.
- Completely plug-in for most 1996 and newer Harley-Davidson models with single filament turn signals and a taillight with running and brake functions.
- Compatible with 2002-later Harley-Davidson factory cruise control.
- Pulsing Brake feature can be turned on or off easily.
- For 1997 - 2013 models with Tour-Pak:
- Lighting can also be converted from stock Run-Brake to multi-function Run-Turn-Brake!
- One kit converts your stock taillight, turn signals and Tour-Pak lights.
- Kuryakyn offers the Tour-Pak harness separately for those that have already added a Run-Turn-Brake controller to their taillight and turn signals and they offer an Adapter Harness that allows the Run-Turn-Brake for Tour-Pak kit to be added to motorcycles already equipped with a Panacea system.
Important notes:
- This is NOT the same controller used in Kuryakyn Panacea Systems.
- This is NOT compatible with aftermarket or accessory modules that alter the functions of the stock taillight and turn signals. If you have already made modifications to your bike's taillight and/or turn signals, you will have to return your bike to stock form before installing this Kuryakyn controller.
- Bikes requiring this Controller that are equipped with factory security system and low-draw or L.E.D. lights also require a Kuryakyn Alarm Compatible Load Equalizer (sold separately).
- Motorcycles equipped with CAN bus electrical systems never require use of a load equalizer.
