The MotoSport.com SKF Complete Fork Seal & Innteck Bushing Kit includes TWO SKF Fork Seal And Wiper Kits, TWO SKF Outer Fork Bushings, AND TWO SKF Inner Fork Bushings in your choice of available fitments with the following features:
SKF Fork Seal And Wiper Kits:
The feel of riding and durability are two decisive factors when designing seals for forks in motorcycles. Especially in off-road applications, such as enduro or motocross, the requirements on the sealing are very demanding.
SKF has developed a range of seals with this in mind. Solutions are available for both off-road and on highway use. For motorcycles, the seals come in pairs with a separate oil seal and dirt wiper seal tuned to each other to give low friction for the best riding experience, as well as long life.
- SKF oil seals and SKF wiper seals developed to achieve superior sealing performance.
- New self-lubricating compound.
- Virtually eliminates stick-slip and improves performance by reducing friction.
- Bench tested over 1 million cycles - Developed in tests conducted at 50 hours with no further maintenance.
- More than 20% reduction in friction compared to standard seals.
- Smoother fork action.
- Compatible with a wide range of original equipment and aftermarket oils.
- Increased seal life and performance.
- Enhanced water and dirt protection capability and withstand UV light.
- Maintain low and constant friction in operation.
- Reduced wear and air suction.
Innteck Inner and Outer Fork Bushings:
High smoothness fork bushing.
- Outer copper treatment, protective against rust.
- Tested with salt spray to verify friction resistance.
- With Teflon coating.
Technical Details:
- Load capacity: 140 N/mm2.
- Coef(u) friction: 0.04 - 0.20.
- Temperature: -195 ~ 280C.
- PV limit (dry): 3.6 N/mm2 x m/s.
- PV limit (oil): 50 N/mm2 x m/s.
Note:
This Kit includes two (2) fork oil seals, two (2) fork dust wiper seals, two (2) outer fork leg bushings, and two (2) inner fork leg bushings; enough for two (2) fork legs.
